Vibrating Feeder

Description: Belt conveyor line has a large market. Although, it can transport the variety of materials, the deviation problem during the process of its operation is the most common. Belt conveyor’s running deviation problem greatly reduces the work efficiency. Therefore, it is very important to analysis the deviation cause and find the solution. In general, the reasons and solutions of running deviation of belt conveyor are the following:

We're here to help:
Easy ways to get the answers you need. Service Online

Install Self-Aligning Roller Group

Self-aligning roller group has many types, such as the intermediate shaft, the four connecting rod type, vertical roller type etc.. Generally, when the total length of the belt conveyor is short, or the belt line is a two-way operation, we use this method. The reason is that the shorter belt conveyor is more easily run deviation and not easy to adjust. Long belt conveyor is best not to use this method, because the use of self-aligning roller group will have a great effect on the service life of the belt.

Adjust The Bearing Roller Group

When the belt line runs deviation in the middle of belt conveyor, we can adjust the roller group location to adjust the deviation. When the belt runs deviation to the upward direction, the lower bearing roller group should move to the left, and the upper should move to the right.

Adjust The Tension

Belt tensioning adjustment is a very important part of the belt running deviation adjustment. The roller adjustment method of belt deviation is similar with the roller adjustment.

The Two-Way Running Belt Conveyor Adjustment

Compared with the one-way adjustment of belt line deviation, it is more difficult to adjust the running deviation of two-way running belt conveyor. Specially, we should adjust a certain direction, and then adjust another direction.

Adjust The Position Of Drive Drum And Turnabout Drum

The drive roller and the turnabout drum adjustment are the important link of belt deviation adjustment. A belt conveyor has at least 2 to 5 drum. All roller installation must be positioned perpendicular to the center line of belt conveyor. If the deviation is too large, it is inevitable to appear the deviation. The adjusting method is similar with adjusting roller group.

Model Trough Size(mm) Max Feeding (mm) Capacity (t/h) REV (r/min) Power (kw) Motor Model Machine Size(mm)
ZSW 180x80 1800×800 300 30-80 970 6-1.5×2   2200×1100×800
ZSW 200x120 2000×1200 300 80-500 970 6-2.2×2   2000×1200×855
ZSW 300X85 3000×900 300 40-100 970 6-2.2×2   3050×1430×1550
ZSW 380X96 3800×960 500 90-200 710 6-15 Y180L-6/15 3880×2240×1880
ZSW 420X110 4200×1100 580 150-350 710 6-15 Y180L-6/15 4300×2450×2010
ZSW 490X110 4900×1100 580 180-380 780 6-15 Y180L-6/15 4980×2450×2010
ZSW 490X130 4900×1300 750 250-450 780 6-22 Y200L2-6/22 4980×2710×2050
ZSW 600X150 6000×1500 800 600-1000 780 6-30 Y255M-6/30 6160×2919×2293

Send A Message

You can get the price list and a SBM representative will contact you within one business day.